TW1 Initial Connection

TW1 Initial Connection


Please ensure you follow ALL steps as they are all crucial to a successful connection.
MAKE SURE STOCKBOOK IS CLOSED WHILE TRYING TO GET THE INITIAL CONNECTION.

Step 1. Turn TW1 On and Enable the Bluetooth

Go to settings > Device settings >  Bluetooth > Enable Bluetooth.

Step 2. Open Blue Soleil on your computer 

Double click on the ‘sun’ and the TW1 device should appear.

Step 3. Enter the passcode

In equipment connections on TW1 go to > Data output  > Bluetooth Select device > connect > window should pop upon Blue Soleil asking for passcode.

Step 4. Pair the device

Right-click on the TW1 icon in Blue Soleil on computer > Pair Devices > type in 0000 in the passkey section.
A green chain-link icon should appear next to the TW1 icon, this indicates that it had paired.

Step 5. Check if there are any connected devices

Right-click on the TW1 icon > select connect Bluetooth serial port – at this point, the TW1 will show no connected devices.

Step 6. Establish Connection

There should be a pop-up screen that briefly tells you that there is an establishing connection.
To identify what comport is being used open Blue Soleil > click on the TW1 icon

Step 7. The TW1 icon will be green with a dotted line connecting to the ‘sun’

Step 8. Save the Device Settings

Go to Device Settings on TW1 > Connected Devices.  The TW1 will now show the name of the connected device/computer or should show the computer name (Ruddweigh).
If not: Select Settings > Type > Select Ruddweigh > Save

Step 9. Close Blue Soleil

After connecting close Blue Soleil on the computer by hitting x at the top right-hand corner.

Step 10. Ready to Weigh

Press the home button on the TW1 > select new session >use last sessions settings > TW1 is now ready for weighing.

Step 11. Setup the TW1 in Stockbook

Open Stockbook > go to Electronic ID > setup > go to scales in setup devices.

Step 12. Manually select Comport

In scales drop-down list select Gallagher/Ruddweigh Km300..800 > go to manual setup and select the correct comport.
Refer to NOTE: under step 6 to verify comport.
DO NOT TOUCH ANY FURTHER SETTINGS ON THIS WINDOW

Step 13. Start Live Entry

Go to Live Entry > you will see the Scale port is now open > Start Live Entry
************************************************************************************
Make sure only the following options are ticked in Equipment Connections |Data Output | Settings | View Options, on the TW1 : Send Prefix, Send Weight State, Send Units, Request Mode.
All other settings on this screen should be unticked.
************************************************************************************

Article ID 2091

    • Related Articles

    • Connecting Device - Gallagher TW-1

      Connecting a Gallagher TW-1 Enable Bluetooth on the TW-1 Have the TW-1 switched on Go to Settings > Device Settings > Bluetooth > enable Bluetooth On the Computer Go to Bluetooth & Devices Scroll to Bluetooth devices discovery – select Advanced from ...

    • Data Warehouse connection problems.

      Getting a 'data warehouse connection lost' or 'timed out' error message when trying to save/retrieve data to and from the Data Warehouse. If you receive this type of error, there could be a problem with your internet connection. Please check that you ...

    • Understanding Device Discovery Lights

      Understanding Device Discovery Lights How to interpret the colours in the Device Discovery window. When connecting your device to Stockbook through the Device Discovery Window the coloured circles next to the device description will alert you to the ...

    • Eziway 7 Trutest

      How do I connect an Eziway 7 Trutest to live entry via Bluetooth? (Blue soliel not compatible with Windows 11, please contact support 1800 799 107) Step 1 Connect the device firstly through Blue Soleil and take note of the COM Port number. Go to ...

    • Connecting Device - Gallagher TWR-5

      Connecting a Gallagher TWR-5 Enable Bluetooth on the TWR-5 Have the TWR-5 switched on Go to Settings > Device Settings > Bluetooth > enable Bluetooth On the Computer Go to Bluetooth & Devices Scroll to Bluetooth devices discovery – select Advanced ...