TSI not connecting in the scales
The TSI Stockbook in the scales section isnt turning green on COM6.
Generally this will happen because the client has connected the load bars after turning the TSI on.
They need to always connect the load bars before turning the TSI on.
Article ID 2042
Related Articles
Connecting RS420 (Greenstick) to TSI
Connecting AllFlex RS420 (Green Stick) to my Stockbook TSi. Before beginning make sure the Bluetooth on the Green Stick is turned on. Some Windows operating systems may present slightly different to the screenshots below. Step 1. Select Bluetooth ...
Connecting Gallagher TWR-1
Connecting a Gallagher TWR-1 Enable Bluetooth on the TWr-1 Have the TWr-1 switched on Go to Settings > Device Settings > Bluetooth > enable Bluetooth On the Computer Go to Bluetooth & Devices Scroll to Bluetooth devices discovery – select Advanced ...
Connecting YardsTech Reader and Scale
Connecting YardsTech Devices YardsTech phone App You will need the YardsTech App on your phone for any calibration or adjustment to the scale and for connecting a non YardsTech reader to the scale. Now Go to Setup > Connections > locate the ...
Connecting Gallagher HR5 Reader
Connecting a Gallagher HR5 Reader Enable Bluetooth on the HR5 Have the HR5 switched on and Bluetooth enabled On the Computer Go to Bluetooth & Devices Scroll to Bluetooth devices discovery – select Advanced from the drop down menu Scroll to More ...
Connecting Devices to Stockbook
The following are general instructions on connecting a device to Stockbook. Connecting a device via Bluetooth Computer Settings Ensure the device is turned on and Bluetooth is enabled. Go to Bluetooth & Devices Scroll to Bluetooth devices discovery > ...