Live Entry - Early Entry of Next VID

Live Entry - Early Entry of Next VID


Live Entry can be made faster by entering the next Visual Identification.

Step 1. In Live Entry - click on the  Setup > Session Defaults menu option

 

Step 2.  Tick the  Allow early entry of next visual ID.  box

  • Click on the  OK  button

Step 3. Select the   Button

  • Type in (or select from the dropdown list) the next ID you wish to add to the queue in the secondary VID box.
  • Only  one  animal can be stored in the queue
 

Step 4.  If you press the Save (F5) or the  Pass (F8) the next animal on the screen will be the VID that you added next in the queue



Article ID 1897

    • Related Articles

    • Setting session defaults in Stockbook live entry.

      It will pay to have a look through the Session Defaults within Stockbook Live Entry to see what features are possible. These instructions guide you through setting up Session Defaults in Stockbook Live Entry. Session Defaults allow you to set certain ...

    • Products in Live Entry

      Products in Live Entry Completing a treatment using products in Live Entry. Treatments: Treatments are user-defined actions that you can carry out on a single animal or a group of animals. Treatments are operations carried out on animals where a ...

    • Data Entry and Add Animals Template Features in Live Entry

      The purpose of the knowledge base is to highlight the features within the Data Entry and Add Animals template setup in Live Entry. 1. Expand/Collapse items : allows you to expand and collapse branches within the lists. There are two sets of these ...

    • Add Data Entry Template in Live Entry

      There are two main types of templates that might need to used. This article discusses the Data Entry Template. Data Entry Templates are used when animals have already been entered into Stock Book Add Animal Templates are used when adding new animals ...

    • New Live Entry: Connecting Devices to Stockbook

      Live Entry: Connecting Devices to Stockbook If a COM port is not assigned, then Stockbook can't communicate with it, and you will need to contact your hardware manufacturer. If you are using a USB-Serial adaptor to attach your hardware with a cable, ...