Eziway 7 Trutest

Eziway 7 Trutest

How do I connect an Eziway 7 Trutest to live entry via Bluetooth?
​
(Blue soliel not compatible with Windows 11, please contact support 1800 799 107)


Step 1

Connect the device firstly through Blue Soleil and take note of the COM Port number.

Go to Electronic ID > Setup (or Live Entry, Setup > Setup Devices) 

Step 2

Select Tru-Test SR2000/XR3000 etc from the drop down box in Scales. 

Check that it on the same Port as the Blue Soliel. You can see the Port in the Status. 

If it is on a different Port to the Soliel, change it through Manual Setup and select the com port that it is connected with in Blue Soliel.

Step 3

In device discovery, wait for the light to turn Bright Green. This means it is connected. 

In the data entry test a weight by having a person or animal stand on the load bar. The weight should come across automatically or press F12. 


Article ID 1647

    • Related Articles

    • TW1 Initial Connection

      Please ensure you follow ALL steps as they are all crucial to a successful connection. MAKE SURE STOCKBOOK IS CLOSED WHILE TRYING TO GET THE INITIAL CONNECTION. Step 1. Turn TW1 On and Enable the Bluetooth Go to settings > Device settings > Bluetooth ...

    • Blue Soleil Expiry Message/Download

      When I open up Blue Soleil, I get the following error: Step 1. Close out of the error warning using the X in the top right corner Step 2. Select the link below Go to the following link: http://www.bluesoleil.com/products/S0001201008080001.html to ...

    • New Live Entry: Connecting Devices to Stockbook

      Live Entry: Pairing Devices to your PC If a COM port is not assigned, then Stockbook can't communicate with it. You will need to contact your hardware manufacturer if the below does not work. Drivers may need to be downloaded. Please see below for ...

    • New Live Entry: Connecting Devices to Stockbook

      Live Entry: Connecting Devices to Stockbook If a COM port is not assigned, then Stockbook can't communicate with it, and you will need to contact your hardware manufacturer. If you are using a USB-Serial adaptor to attach your hardware with a cable, ...

    • Sounds in Live Entry

      It is possible to turn specific sounds on/off in Live Entry. Step 1. In Live Entry, go to Setup > Session Defaults Step 2. Select the Sounds tab Tick or untick when you do or do not want to hear sounds Press OK Article ID 1914