Connecting Te Pari drench gun (STAND ALONE)

Connecting Te Pari drench gun (STAND ALONE)

Te Pari Gun Setup:


Turn on the gun by pressing the power button (red square in picture)

1. Press menu (green square in picture) x3

2. Pause and press menu again > Use the arrows to select the tick > press menu

3. WiFi Mode: Te Pari app > press menu

4. DG SSID: Te Pari

5. WiFi security: Select X > press menu

6. Wait for 'sond option' display to disappear

Connect the drench gun to your device's wifi:

1. On your device > open Network and Internet
2. Show available networks
3. Select Te Pari (tick connect automatically)



Open Stockbook
1. Select Electronic Id > Setup > From the drop-down menu under Drench/Injection Gun select 'Te Pari G20'
2. Manual Setup > IP: 10.10.10.1 > Ok


Note: 
The circle next to 'Drench/Injection Gun' in Stockbook should now be green
The WiFi symbol on the Te Pari drench gun will now be lines (these will disappear when you exit out of this window - this is normal!)




Product Setup
1. Select product > Setup > Add or edit product to ensure application rate is set
      (Applied at the rate of ____ per ____kg)
2. Add treatment/product to your Data Entry template. Ensure batch no. recorded. 

Start Live Entry
Ensure the Data Entry template is setup correctly with treatment and batch number.
Dosage will automatically load on the gun's screen (plus fill the SB display window) when a weight locks on the scale. 
The WiFi symbol on the Te Pari drench gun will now be a solid symbol. 



    • Related Articles

    • Connecting Te Pari drench gun (WITH YardsTech Scale)

      Setup YardsTech Scales: Turn Scales on: hold down the power button until both lights are displayed. Phone Setup: 1. Ensure your mobile device is on the same WiFi network as your YardsTech Scales 2. Open the YardsTech app 3. The YardsTech scale should ...

    • Connecting Gallagher TWR-1

      Connecting a Gallagher TWR-1 Enable Bluetooth on the TWr-1 Have the TWr-1 switched on Go to Settings > Device Settings > Bluetooth > enable Bluetooth On the Computer Go to Bluetooth & Devices Scroll to Bluetooth devices discovery – select Advanced ...

    • Connecting ALEIS reader to edit

      Connecting ALEIS reader Have the ALEIS Reader switched on and enable Bluetooth. Connecting the device to the computer via Bluetooth Go to Bluetooth & Devices Scroll to Bluetooth devices discovery – select Advanced from the drop down menu Scroll to ...

    • Connecting Gallagher HR5 Reader

      Connecting a Gallagher HR5 Reader Enable Bluetooth on the HR5 Have the HR5 switched on and Bluetooth enabled On the Computer Go to Bluetooth & Devices Scroll to Bluetooth devices discovery – select Advanced from the drop down menu Scroll to More ...

    • Connecting RS420 (Greenstick) to TSI

      Connecting AllFlex RS420 (Green Stick) to my Stockbook TSi. Before beginning make sure the Bluetooth on the Green Stick is turned on. Some Windows operating systems may present slightly different to the screenshots below. Step 1. Select Bluetooth ...